INO-CUT Werkzeugsystem zur Bohrungsbearbeitung
Schneidplatten zum
Ausdrehen, Innenfreistechen und Kopieren (innen)
ab Durchmesser 7,8mm / 11,0 mm / 13,7 mm
Info:
Kop = Kopieren
AuI = Ausdrehen und Innenfreistiche
R/L = Drehrichtung:
R = Bearbeitungsrichtung rechts
L = Bearbeitungsrichtung links
KH-Typ = Klemmhaltertyp
r = Ecken-Radius
HM-B = Hartmetall-Sorte und Beschichtung
| Bezeichnung | Artikel-Nr. | Info | R/L | Dmin. | w1 | f | s | d | KH-Typ | r | t max. | HM-B | In Warenkorb | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IC-S08.2555.02-R-BD3 | 135722 | Kop | R | 7.8 | 30° | 4.65 | 3.5 | 6.0 | 608 | 0.2 | 1.0 | BD3 | ||
| IC-S08.4746.02-L-BD3 | 138597 | AuI | L | 7.8 | 47° | 4.65 | 3.5 | 6.0 | 608 | 0.2 | 1.2 | BD3 | ||
| IC-S08.4746.02-R-BD3 | 118375 | AuI | R | 7.8 | 47° | 4.65 | 3.5 | 6.0 | 608 | 0.2 | 1.2 | BD3 | ||
| IC-S11.2755.02-L-BD3 | 129413 | Kop | L | 11.0 | 30° | 6.7 | 4.2 | 8.0 | 611 | 0.2 | 2.3 | BD3 | ||
| IC-S11.2755.02-R-BD3 | 126370 | Kop | R | 11.0 | 30° | 6.7 | 4.2 | 8.0 | 611 | 0.2 | 2.3 | BD3 | ||
| IC-S11.4767.02-R-BD3 | 138271 | AuI | R | 11.0 | 47° | 6.7 | 4.2 | 8.0 | 611 | 0.2 | 2.3 | BD3 | ||
| IC-S14.3555.02-R-BD3 | 135847 | Kop | R | 13.7 | 30° | 8.7 | 5.3 | 9.0 | 614 | 0.2 | 4.0 | BD3 | ||
| IC-S14.4055.02-R-BD3 | 128073 | Kop | R | 13.7 | 30° | 10.2 | 5.4 | 9.0 | 614 | 0.2 | 4.3 | BD3 | ||
| IC-S14.4787.02-L-BD3 | 138599 | AuI | L | 13.7 | 47° | 8.7 | 5.3 | 9.0 | 614 | 0.2 | 3.0 | BD3 | ||
| IC-S14.4787.02-R-BD3 | 129989 | AuI | R | 13.7 | 47° | 8.7 | 5.3 | 9.0 | 614 | 0.2 | 3.0 | BD3 |
